Working Principle Blender

Before the blender is used, first read the book / brochure that included when you buy a blender to avoid tool damage and accidents that may result. In general, the blender working procedures are as follows:

1 Make sure that the ON-OFF switch is in the OFF position blender.

2 Prepare all the ingredients to be blended. Separate material grains such as corn, pepper and materials to hard of a soft material such as bananas, apples, tomatoes, capsicum and so forth.

3 Use the blending bowl as necessary. Small bowl to soften hard materials and dry, while the soft and wet materials using a large bowl.

4 Place the bowl of dough on top of the bowl holder with the right, then turn up the bowl can not be drawn to the top left of the stand. There is also a blender that does not need to be rotated, but the bowl still held by hand. First a small bowl filled with the material to be blended, and then covered with a shredder blade holder, then mounted on a stand blender. While not the case for a large bowl. First batter bowl mounted on a stand and filled the bowl to blend ingredients.

5. After the move went well and safe working, press the ON-OFF switch to move the switch from the OFF position to the ON position. At that time the motor will spin and rotate blender blender blades inside the blender bowl. Rarefaction or destruction of material begins to take place. Attention! Do not lift the bowl of a stand mixer bowl when the motor is turning. Dangerous!

6 After the texture of the material feels smooth (sound the motor and blades sounds fine), turn off the motor (position ON-OFF switch in the OFF position).

7 Remove the bowl from the stand. Attention! Do not operate the motor for too long without a break exceeding one hour for cooling. Dangerous! Can scorch the blender motor windings.

8 At the time of completion using a blender, be cleaned. Rinse with water, except for the body. Only the blender body that should not be cleaned or washed with water simply wipe with a clean cloth, because in it there is a motor and circuit listrikanya. Washing with water can cause motors and electrical circuits in it shorted or short circuit and fire.

9 Save the blender at a safe place, not humid, not bronzed sun, water or liquid tertetesi not certain or not showered, tidah easy to fall, is not easy to reach the children who do not understand the use of a blender.